Bodyshell - factory-fitted separate details |
Bodyside Steps Boiler supports Chimney Coal bunker Coal load(s) Handrails Injector Lamp irons Lubricator mechanism Numbers - etched - pre fitted Pipe work Safety valve Smokebox door dart Smokebox door numberplate Water tank caps |
Bufferbeam detail (pre-fitted) |
Cosmetic screw link coupling Pipework - pre-fitted to front Pipework - pre-fitted to rear Sprung buffers |
Cab, footplate & interior detail |
Detailed & painted Glazing |
Chassis/underframe detail |
Brake rigging chassis Correct-thickness "stamped" rods Footsteps Inside valve gear Lubricator mechanism Sand boxes Sanding gear Sprung front & rear pony trucks |
Wheel "aesthetics" |
Chemically-blackened Metal-pin point bearings Painted |
Body Construction |
Partial diecast with plastic parts |
Chassis construction |
Diecast |
Coupling socket/mounting |
NEM pockets |
Coupling type |
Tension lock |
Loco-driven wheels (number of) |
6 wheels |
Minimum radius |
Radius 2 |
Separating the body from the chassis |
Secured with one or more screws |
Weighting (to assist adhesion) |
Within body Within chassis |
DCC Capability: |
DCC Ready. 18-pin socket |
DCC speaker |
Provision for a speaker (dimensions unknown) |
Motor location |
Centre of chassis |
Motor type |
Coreless with flywheel |
Pickups |
All wheels |
Power collection |
2 rail DC |
Working lights |
Firebox flicker |
This information is maintained by our team of Product Experts. Please don’t hesitate to get in touch if you have any feedback or questions about this content.