Bodyshell - factory-fitted separate details |
Chimney Dome Handrails Injector Injector pipework Lamp irons Nameplates - plastic - pre-fitted Pipe work Regulator linkage Reverser Safety valves - turned brass Smoke deflectors Smokebox door numberplate Water scoop Whistle - turned brass |
Bodyshell - separately-fitted details - in detailing pack (where applicable) |
Drain cocks Footsteps |
Bufferbeam detail (in detailing pack) |
NEM Couplings Pipework (for front) Pipework (for rear) |
Bufferbeam detail (pre-fitted) |
Cosmetic screw link coupling Lifeguard Pipework - pre-fitted to front Pipework - pre-fitted to rear Sprung buffers |
Cab, footplate & interior detail |
Detailed & painted Fallplate Footplate doors Glazing |
Chassis/underframe detail |
Correct-thickness "stamped" rods Fluted connecting rods with oily finish Footsteps Inside valve gear (cosmetic) Pipework Sanding gear Sprung front bogie |
Detail pack also contains... |
Brake rigging |
Tender |
Has enclosure for speaker Houses digital decoder Houses PCB |
Wheel "aesthetics" |
Painted Traction tyres |
Body Construction |
Partial diecast with plastic parts |
Chassis construction |
Diecast |
Coupling socket/mounting |
NEM pockets |
Coupling type |
Tension lock |
Loco-driven wheels (number of) |
4 wheels |
Minimum radius |
Radius 2 |
Separating the body from the chassis |
Secured with one or more screws |
Weighting (to assist adhesion) |
Within chassis Within tender |
DCC Capability: |
DCC Ready. 8-pin socket |
DCC speaker |
Provision for 28mm round speaker |
Motor location |
Locomotive |
Motor type |
5-pole (standard) |
Pickups |
All wheels |
Power collection |
2 rail DC |
This information is maintained by our team of Product Experts. Please don’t hesitate to get in touch if you have any feedback or questions about this content.