Bodyshell - factory-fitted separate details |
Chimney Coal load(s) Dome Drain cocks Handrails Individual plates on top of running board Injector Lamp irons Nameplates - etched - pre-fitted Numberplates - plastic - require fitting Pipe work Regulator linkage Reverser Safety valve Smokebox door (magnetically attached) Smokebox door dart Tender handbrakes Water scoop Whistle Whistle guard |
Bufferbeam detail (in detailing pack) |
Pipework (for rear) |
Bufferbeam detail (pre-fitted) |
Cosmetic screw link coupling Lifeguard Pipework - pre-fitted to front Pipework - pre-fitted to rear Sprung buffers |
Cab, footplate & interior detail |
Detailed & painted Fallplate Glazing |
Chassis/underframe detail |
Brake rigging chassis Correct-thickness "stamped" rods Fluted connecting rods with oily finish Footsteps Inside valve gear (cosmetic) Pipework Sanding gear Sprung front bogie |
Detail pack also contains... |
Tool for removing PCB |
Tender |
Has easy-to-use coupling to loco Has enclosure for speaker |
Wheel "aesthetics" |
Chemically-blackened Painted |
Body Construction |
Partial diecast with plastic parts |
Chassis construction |
Heavy diecast |
Coupling socket/mounting |
NEM pockets |
Coupling type |
Tension lock |
Loco-driven wheels (number of) |
6 wheels |
Minimum radius |
Radius 2 |
Separating the body from the chassis |
Secured with one or more screws |
Weighting (to assist adhesion) |
Within boiler Within chassis Within tender |
Working cosmetic features |
Opening smokebox door |
DCC Capability: |
DCC Ready. 18-pin socket |
DCC speaker |
Provision for a speaker (dimensions unknown) |
Motor location |
Locomotive |
Motor type |
5-pole supercreep with 2 flywheels |
Pickups |
All except front bogie |
Power collection |
2 rail DC |
Working lights |
Firebox flicker |
This information is maintained by our team of Product Experts. Please don’t hesitate to get in touch if you have any feedback or questions about this content.