|
Bodyshell - factory-fitted separate details |
Boiler supports Chimney Coal bunker Coal rails Dome Drain cocks Handrails Injector Injector pipework Lamp irons Nameplates - etched - pre-fitted Pipe work Regulator linkage Reverser Safety valves - turned brass Smokebox door dart Whistle - turned brass |
Bufferbeam detail (pre-fitted) |
Cosmetic screw link coupling Pipework - pre-fitted to front Pipework - pre-fitted to rear Sprung buffers |
Cab, footplate & interior detail |
Cab variations - open & closed Detailed & painted Glazing |
Chassis/underframe detail |
Brake rigging chassis Correct-thickness "stamped" rods Footsteps Inside valve gear Sanding gear |
Wheel "aesthetics" |
Chemically-blackened Metal-pin point bearings Painted |
Body Construction |
Plastic with metal parts |
Chassis construction |
Diecast |
Coupling socket/mounting |
NEM pockets |
Coupling type |
Tension lock |
Loco-driven wheels (number of) |
6 wheels |
Minimum radius |
Radius 1 |
Separating the body from the chassis |
Secured with one or more screws |
Weighting (to assist adhesion) |
Within chassis |
DCC Capability: |
DCC Ready. 21-pin socket |
DCC speaker |
Provision for a speaker (dimensions unknown) |
Motor location |
Centre of chassis |
Motor type |
5-pole with flywheel |
Pickups |
All wheels |
Power collection |
2 rail DC |